Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Riser

49°N Steel Repair Bar
$15.99
- 25.4mm bar clamp - 620mm width with 10 backsweep
Bontrager Approved 31.8 MTB Bar
$40.99 - $49.99
Follow the trail wherever it leads with the super-strong alloy handlebar designed to stand up to the rigors of variable off-road terrain. The Bontrager Approved 31.8 alloy handlebar is shot-peened for durability and single-butted to save weight. Key features: - Single-butted, tapered-wall, 6061-T6 alloy construction - Shot peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control setup - 40mm of cut marks on each side for easy width customization - Bar end compatible
Race Face Chester Handlebar
$54.99
Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward
Race Face Chester 35 Rise
$59.99
Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number. - Manufactured from cold drawn, seamless 6061 Aluminum - Shot peened for increased fatigue life - 35 optimized triple butted design
Race Face Turbine R 35 Handlebar
$79.99 - $109.99
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color
Bontrager Kovee Elite 35 MTB Handlebar
$99.99
- Oversized 35mm clamp diameter offers increased strength and minimal weight - Shifter and brake lever position lines for spot-on control setup - 4 degree upsweep and 9 degree backsweep optimal for XC and trail - 40mm of cut marks on each side allow for easy width customization
Bontrager Line 35 27.5mm Rise MTB Bar
$99.99
Large and in charge Key features - Oversized 35mm clamp diameter offers lighter weight and higher strength than 31.8mm diameter - Quad-butted, tapered wall, 7050-T6 aluminum construction - Laser-etched brake lever position lines for spot-on control setup
Bontrager Line Handlebar
$99.99
Change what's possible on the trail with a bar that can handle varying terrains and obstacles. The Line 35 gives you a stable base to work from as you weave through dense forests and launch off dirt jumps. - Oversized 35mm clamp diameter offers lighter weight and higher strength than 31.8mm diameter - Quad-butted, tapered wall, 7050-T6 aluminum construction - Laser-etched brake lever position lines for spot-on control setup
Race Face Atlas Riser Handlebar
$99.99
Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep
TruVativ Atmos 7k Riser Bar
$103.00
The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width. - 760mm wide - Wide to start and trimmable by 30mm each side - Made from tough 7050 lightweight aluminum SPECIFICATIONS - Type: Riser - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9
TruVativ Descendant 35mm DH Handlebar
$103.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendent geometry from TruVativ's best enduro rider’s input - Backsweep: 9° - Upsweep: 5°
Bontrager Line 35 MTB Handlebar
$109.99
A 35mm mountain bar that maintains a forgiving ride feel and maximizes strength with minimal weight. Large and in charge Line 35 is ready for any terrain and changes what's possible on the trail. It maintains comfort and control on any ride, and an oversize clamping diameter increases strength and decreases overall bar and stem weight while ensuring a compliant, forgiving ride. Proven sweep and convenient graphic markings help dial in the perfect setup. Product details - Oversized 35mm clamp diameter offers lighter weight and higher strength than 31.8mm diameter - Quad-butted, tapered wall, 7050-T6 aluminum construction - Laser-etched brake lever position lines for spot-on control setup
Evo Brooklyn Basket
$109.99
- Low-profile integrated handlebar-basket - Compatible with 31.8mm or 25.4mm stems - 6061 aluminum - Cargo surface: 230 x 335mm (9 x 13.1-inch) - Handlebar width: 650mm - Max Weight 10kg/22lbs - Comfortable 30-degree sweep
Deity Components Ridgeline
$119.99
When designing the all-new Ridgeline aluminum trail handlebar, our goal was to create the perfect trail bar that disappears beneath you while encouraging you to chase adventure and seek out new experiences wherever possible. We precisely targeted lower rise options at 15mm and 25mm with a stable width of 800mm for a more efficient and aggressive position on the bike. To do this, we took an oversized 35mm bore platform and dispersed the load over an 800mm width. It was critical for us to keep the weight down without sacrificing strength. This is where our unique proprietary Gradient Butting Technology shines, allowing us to remove excess material in areas of less stress and fatigue that can cause the stiff feeling commonly felt with other 35mm handlebars on the market. We can then add material to areas of greater stress and fatigue to increase the long-term strength and durability. This gives you, the rider, more confidence to chase new experiences and forget about the gear beneath you. Our goal is for you to become one with the bike and never let up on chasing your new adventure! - Oversized 35mm Bore Aluminum Handlebar - Designed for Enduro / All Mountain / Trail - Incredibly detailed two-tone bead blasted and polished ano finish - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - 800mm wide - 9 degree bend x 5 degree upsweep - Flex and deflection characteristics designed to match the Skyline handlebar - Features measured cut marks and center alignment detail - Black ano finish with colored graphics - Weight: 303 grams
Renthal Fatbar 35
$159.99
- High strength 7 series Aluminium Alloy - Shot peened for increased fatigue life - Corrosion and abrasion resistant hard anodized finish - Laser etched positioning grid for easy set up - Width marks allow personalized fit adjustment - Permanent Graphics
Renthal Fatbar V2
$159.99
- The second version of the Fatbar has undergone a full structural re-design. - In keeping with the demand for wider, gravity oriented handlebars, the width increased to 800mm. - Proven high grade 7050 T6 aluminium and variable gauge taperwall construction
Race Face Next R 35 Handlebar
$169.99 - $219.99
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio
Race Face NEXT 1/4-inch Riser Carbon Handlebar
$199.99
- Intended for Cross Country and Trail use - 1/4 Risers have a 2deg upsweep - Unidirectional carbon fiber with reinforced stem anti-crush zone - Bar Clamp Diameter: 31.8 mm - Bar Rise: 5 mm - Bend: 8 deg - Weight: 175 g
Bontrager Line Pro Handlebar
$214.99
Contend with rocky trails behind the brute strength of the Line Pro Carbon handlebars. OCLV carbon construction in an oversized 35mm diameter provides you with a lightweight mountain bike handlebar that delivers exceptional strength for the toughest trails. - Pro-level quality handlebar in oversized 35mm clamp diameter offers increased strength and minimal weight - 15mm or 27.5mm rise helps you dial in the perfect position - Brake and shifter lever position lines for spot-on control setup - 40mm of cut marks on each side for easy width customization
Deity Components Speedway Carbon
$234.99
For DEITY, speed motivates us in everything we do and is certainly the inspiration for the all-new Speedway Carbon DH Handlebar. Built for the most demanding and brutal conditions in the world with only one goal at hand…insane, mind-numbing speed. Not only do all DEITY carbon handlebars beat every other bar on the market in strength, they are specifically refined to allow the rider to push the limits while maintaining complete control. At 810mm wide with a 30mm rise, this 35mm bore handlebar is impressively responsive and comfortable at the same time. We've found the sweet spot that absorbs maximum vibration, chatter, and impact while maintaining the stiff reactive feeling that allows you to dance on the edge of catastrophe, ever increasing your need for speed. - Oversized 35mm Bore Carbon Handlebar - Designed for DH / Enduro / All Mountain - Developed and designed exclusively with our own in house DEITY molds - Unidirectional Carbon Construction - Damping properties reduce hand fatigue - 30mm Rise - 810mm Width - 9 degree bend x 5 degree upsweep - The ultimate combination of strength, weight, and ride quality - Textured non-slip stem clamping surface - Textured grip ends for added bite - The strongest 35mm Downhill / Enduro Carbon Handlebar on the market! - Available in Matte Unidirectional Black Carbon with colored graphics - Covered by our Lifetime Crash Replacement Policy to the original owner - Recommended MAX Torque Spec range (4 - 4.5 Nm) - Weight: 245 grams
TruVativ Descendant Riser Carbon All-Mountain Handlebar
$249.99
It's Stiff, Not A Stiff. It's the little things that matter most. That's why we scrutinized our carbon riser bars, tasking our pros and engineers to make great even better. The result? We added 5mm to the rise of our widest bar; and fine-tuned the carbon laminate. This translates to an improved riding position, more feel and flex, and less arm fatigue making your time on the trail more smiles, less chatter. Features - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness Specifications: - Clamp Diameter: 31.8mm - Width: 760mm - Material (HB): Carbon - Rise (HB): 20mm - Type (bar): Riser - Upsweep (degree): 5
Bontrager Line Pro Carbon 35 27.5mm Rise MTB Handlebar
$254.99
The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversized 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain. - Pro-level quality handlebar in oversized 35mm clamp diameter offers increased strength and minimal weight - 27.5mm high rise helps you dial in the perfect hand position - Brake and shifter lever position lines for spot-on control setup - 40mm of cut marks on each side for easy width customization - OCLV Carbon construction is the benchmark for durability and light weight
TruVativ Descendant 35mm Carbon Riser Bar
$268.00
On the big days, it's the small comforts that make the ride better, longer. That's why we re-engineered our carbon riser bars to improve feel, flex and rider positioning and reduce trail buzz. These bars are stiff, precise and forgiving. With a re-tuned carbon laminate, your shoulders, arms and hands keep fresh all day. - Available in 760mm carbon with 20mm rise - 35mm clamp - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness SPECIFICATIONS - Type: Riser - Clamp Diameter: 35.0mm - Width: 760mm - Rise: 20mm - Backsweep (degrees): 7
TruVativ Descendant CoLab Troy Lee Designs Riser Carbon Handlebar
$270.99
Stiff. Precise. Wide. Camo. The genius of good design manifests itself nicely in camo. Demure. Yet bold. For our latest CoLab, we tapped into the brain trust that is Troy Lee Designs. We handled the intel on the bar specs with our famous Descendant geometry, built from input from our best riders, and Troy handled the finishing touches. His dream: hi-tech camo. Fit to be seen. Specifications: - Clamp Diameter: 35.0mm - Width: 800mm - Material (HB): Aluminum, Carbon - Rise (HB): 20mm - Application (HB): Freeride/Downhill - Type (bar): Riser - Backsweep (degrees): 9 - Upsweep (degree): 5
Renthal Fatbar Carbon
$299.99
- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.
Renthal Fatbar Lite Carbon 35
$299.99
- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar. - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid
Page 1 of 1