Parts & Accessories

All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes

The Wahoo TRACKR SPEED sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy.

Know what's coming. Ride with extra confidence with Trek CarBack Radar Rear Light. CarBack's radar helps detect rear-approaching vehicles from up to 240m and provides audio and visual alerts through paired GPS head units for increased on-bike awareness. Built with integrated best-in-class Daytime Running Lights that are visible from up to 2km away, CarBack is a must-have for every cyclist riding on shared roads. - CarBack can detect and alert riders of rear-approaching vehicles from up to 240m away - Compatible with most cycling GPS computers - Pair CarBack with the Trek Accessory app to see a vehicle's rear-approaching and passing distance on your smartphone - Designed with focus, flash, and range to be Daytime-visible from up to 2km away - Four light flash modes: Day Flash 90LM, Day Steady 25LM, Night Steady 5LM, and Night Flash 5 LM - Visible fuel gauge LEDs make it easy to see CarBack's 7+ hour battery status - IPX7 waterproof rating to confidently ride through wet conditions - Includes Quick Connect Plus rear mount and USB-C charging cable

Keep your bike operating as it should.

Features
- Diametrically magnetized to improve sensor reception
- For use with 6-hole disc rotor mounts
- Compatible with rear dropout sensors only

With this Tacx wireless ANT+ receiver for Android devices with a micro USB port, you can connect to devices that communicate via ANT+. For example a heart rate meter, speed and cadence sensor, sports watch, GPS device or bike computer. This enables you to keep track of your performance continually. It also allows you to link an ANT+ trainer to the Tacx Cycling app (tablet) or Tacx Training app (smartphone), or connect an older model Tacx trainer which only has ANT+ to your telephone, so you can train with the Tacx Training app and Tacx Cloud. The device you want to connect must have a micro USB port and Android 4.3 or higher. This ANT+ dongle is only compatible with devices that have USB On-The-Go.

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

SECURE MOUNTING
Both mounts come with our patented dual-stage lock, which allows you to ride with confidence knowing that your smartphone will stay secure on your bike, no matter the terrain.

QUICK TO ATTACH / DETACH
Simply twist and lock to view apps as you ride such as Strava®, MapMyRide or Apple® maps. Detach just as easily so you don’t miss a photo opportunity or important call. Remember, it’s all in the technique, not the force.

UNRIVALLED DESIGN
Both mounts are designed for aerodynamics. The Out Front Mount PRO features a lower profile and super rigid anodised aluminium mounting arm. The standard Out Front Mount can be reversed to go over the stem of your bike's handlebars.

Add a coloured lever to style your Quad Lock® Mount to your bike.

WHAT'S INCLUDED
- 1 x Quad Lock® Out Front Mount
- 3 x Spacers for 22mm, 25.4mm and 31.8mm bars (mount suits 35mm bars)
- 1 x Threaded Base Cap
- 1 x 3mm Hex (Allen) Key

TECH SPECS
- Can be reversed for over stem mounting
- Suits handlebar diameters: 22mm, 25.4mm, 31.8mm and 35mm (7/8", 1", 1 1/4", and 1-3/8")
- Stainless steel hardware
- 360 degree mount head rotation
- Compatible with Quad Lock® Camera/Light Adaptor
- Compatible with Quad Lock® Waterproof Wireless Charging Head
- Compatible with all Quad Lock® Cases and Universal Adaptors

SECURE MOUNTING
Both mounts come with our patented dual-stage lock, which allows you to ride with confidence knowing that your smartphone will stay secure on your bike, no matter the terrain.

QUICK TO ATTACH / DETACH
Simply twist and lock to view apps as you ride such as Strava®, MapMyRide or Apple® maps. Detach just as easily so you don’t miss a photo opportunity or important call. Remember, it’s all in the technique, not the force.

UNRIVALLED DESIGN
Both mounts are designed for aerodynamics. The Out Front Mount PRO features a lower profile and super rigid anodised aluminium mounting arm. The standard Out Front Mount can be reversed to go over the stem of your bike's handlebars.

Add a coloured lever to style your Quad Lock® Mount to your bike.

WHAT'S INCLUDED
- 1 x Quad Lock® Out Front Mount PRO assembled with black lever and hardware
- 3 x Spacers for 22.2mm, 25.4mm and 31.8mm bars (mount suits 35mm bars)
- 1 x Threaded Base Cap
- 1 x 3mm Hex (Allen) Key

TECH SPECS
- Aerodynamic, low profile straight arm
- Black anodised aluminium clamp and arm, made by precision CNC
- Assembled with black lever & hardware
- Suits handlebar diameters: 22mm, 25.4mm, 31.8mm and 35mm (7/8", 1", 1 1/4", and 1-3/8")
- 360 degree mount head rotation
- Compatible with Quad Lock® Light/Camera Adaptor
- Compatible with Quad Lock® Waterproof Wireless Charging Head
- Compatible with all Quad Lock® Cases and Universal Adaptors

Save space in your bicycle's cockpit with our Quad Lock® Stem Cap Mount or Quad Lock® Stem Cap Mount Adjustable. Both securely install between your bicycle's stem and stem cap, offering compatibility with a large variety of stem angles.

SECURE MOUNTING
These are our lightest and strongest bike mounts. Engineered from ultra-light aircraft-grade aluminium, then rigorously tested for unmatched strength and durability. This high-performance material ensures the mounts remain tough without adding unnecessary weight, making them ideal for cyclists who demand strength and efficiency. With our patented dual-stage lock, you can ride confidently, knowing your smartphone will stay secure, even on the roughest terrain.

SLEEK DESIGN
Crafted from premium aircraft-grade CNC-machined aluminium, with black hardware and a compact black lever, our Stem Cap Mounts offer a minimal and lightweight aesthetic. They install seamlessly between your bike's stem and stem cap, ensuring a clean, unobtrusive look.

OPTIMAL VIEWING POSITION
Both mounts feature a dual-sided head design, allowing you to mount the lever head on either side, offering more flexibility in adjusting your optimal phone viewing position on a variety of stem angles.

The Stem Cap Mount Adjustable features a screw-tightened hinge to hold firmly in place in your preferred viewing angle.

QUICK TO ATTACH / DETACH
Simply twist and lock to view apps as you ride such as Ride with GPS®, Strava® or maps. Detach just as easily so you don’t miss a photo opportunity or important call.

WHAT'S INCLUDED
- 1 x Quad Lock® Stem Cap Mount Adjustable (with short black lever and black hardware)
- 1 x Allen (Hex) Key

TECH SPECS
- Black anodized aircraft-grade aluminum, forged by precision CNC
- Assembled with short black lever and black hardware for minimalist design aesthetic
- Suits stem diameters 1 1/8" (28.6mm)
- Fits cleanly above the stem and held securely by the stem cap
- Hinged design, tighten in place with included hex key
- Dual-sided, reversible design. Attach the head to either side of the mount for your optimal setup and phone positioning

Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin High Mount for a clean, flush look that securely holds your Garmin centered over the stem. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin Low Mount to add a Garmin GPS directly to the Blendr stem mount. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Blendr add-on to Kovee Pro 35 stems Clean up your Bontrager Kovee Pro 35 stem cockpit with Blendr Pro bases. - Blendr works with this simple formula: Stem + Base + Mount. Add accessory - Bases for use with the Kovee Pro 35mm stem - Add any accessory mount (sold separately) for an elegant, integrated look

Light up the road

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Universal Ion Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen.

- Blendr is an elegant, integrated accessory mounting solution
- Clip can be rotated for compatibility with many Bontrager accessories
- Works with any Blendr-compatible stem and the accompanying base

Pro Blendr is the ultimate computer integration system for clean and easy installation directly to Knock Block. - Start with a Knock Block equipped frame using the appropriate frame chip with display tabs, and finish with Pro Blendr Knock Block Computer Mount for secure mounting of computers behind the stem to keep your cockpit spotless. - In addition to the correct frame chip with display tabs, don't forget your Garmin or Wahoo Adapter Puck! These are sold separately so you can build the ultimate Blendr system that's right for you.

- Replacement parts and accessories for SpeedTrap Digital Speed Sensor - Fork Cap covers SpeedTrap pocket when sensor is removed - Spacer is required on some forks to position sensor closer to wheel magnet

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Trip Computer Mount for a clean, flush look that securely holds your Bontrager Trip computer in a perfect position to see on the go. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Insta-Mount or Trip Computer - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

**Only compatible with Service Course, Service Course SL and SL Speed Stems (4 bolt)** Zipp’s QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes, system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. The Zipp QuickView Integrated mount will have two variants, one compatible with Service Course, Service Course SL, and SL Speed models, and another designed for use with the SL Sprint. This is an easy way to add elegant integration to your road bike. A Hammerhead puck insert is included with each faceplate, making your Karoo 2 unit compatible and secure with the Zipp QuickView Integrated mount. FEATURES -Computer compatibility: Hammerhead, Garmin™, Wahoo™ -Accessory compatibility: GoPro™ -Lights: Niterider Lumina Series™ (with adapter), Light and Motion™, Bontrager™ (with adapter), Gloworm™ (with adapter), Lezyne™ (with adapter), Infini™ (with adapter), Sigma Sport™ -Lifetime warranty

Features
- Zipp Quickview Multimount Computer Mount, 31.8mm, Quarter Turn/Twist Lock, Includes Lower Mount For Light Or Camera
- SRAM Model ID: AC-CM-MM-A1

Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS

Features
- Insert ZIPP Quickview mount for HAMMERHEAD Device (Including 2 bolts)
- SRAM Model ID: ST-SPP-A0

- Easy to mount smartphone case holder - High resistance against impacts - 360 degrees adjustable angle - Quarter-turn type mount allows to place the phone in portrait or landscape mode - Waterproof, touch-screen compatible cover included

Mounts to the Knock Block frame chip display tabs on Rail Gen 2 to mount the Bosch Kiox display behind the stem to keep your cockpit spotless.

Features
- Not Bosch Smart System compatible
- Designed for Rail Gen 2 frames
- Refer to Service Manual for assembly instructions and service

The right parts for the right bike.

Features
- Compatible with Carbon and Aluminum
- Refer to Service Manual for assembly instructions and service

Specific for Bosch Smart Systems.

Features
- 970mm cable length
- Mounting hardware not included

Original replacement battery cover for your Powerfly.

Features
- Refer to the Service Manual for assembly & service instructions
- Hardware sold separately

Use a smaller battery in your 750Wh or 625Wh RIB battery slot.

Features
- For use with Bosch Smart System batteries only
- Used in 750Wh battery slots with 625Wh batteries
- Used in 625Wh battery slots with 500Wh batteries
- Not for use in 750Wh battery slots with 500Wh batteries
- Hardware is not included
- Refer to Service Manual for assembly instructions and service

Foam pads to help reduce movement of the battery inside a RIB cavity.

Features
- Compatible with all RIB equipped models
- Refer to Service Manual for assembly instructions and service

The extension cord is an optional item for the SRAM AXS drivetrain, powering the derailleur from the e-system battery instead of a separate AXS battery.
Integrating into the derailleurs AXS battery port, the cord routs through the bicycle frame into the e-system drive unit.

Features
- Works with any AXS derailleur
- Powers derailleur by main e-system battery

This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm