Indoor Cycling

Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.

BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters. Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth adapter for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.

The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground

Keeps corrosive sweat from reaching your frame. - Cell phone pouch included.

- Includes clutch knob and L-bolt - Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt - Magnus Clutch Knob should only be used with Magnus Smart Trainer - Watch our video to learn more

Connect your PC to CycleOps VirtualTraining.

For a stable, worry-free ride with any rear wheel-mounted trainer. Product Features - For a stable, worry-free ride with any rear wheel-mounted trainer. - Unique 3-level design lets you select the level of difficulty. - Stack two blocks to simulate climbing workouts. Three different positions to raise your front wheel and simulate hill climbs - 2.1 inches (5.3 cm) - 2.7 inches (6.8 cm) - 3.1 inches (7.9 cm)

The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.

The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.

A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.

The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.

Protects your floor from sweat and bike grime. Product Features: - Protects your floor from sweat and bike grime. - Keeps your trainer from "walking" during intense workouts. - Durable construction absorbs vibration and noise. - Training mat measures 65 x 36 inches. - Black PVC foam gives the training mat superior sound absorption. - Resistant to moisture, and easy to clean with soap and water when necessary.

The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes

The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts

- Rear tire specially made for indoor trainer - The compound has a much lower internal resistance

- Includes Sweatcover for Smartphone (T2931) and Towel (T2940) - 891076

Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.

Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our non-slip and water-repellent (aka sweat) Floor Mat is designed to keep you safe and protect your floors while in your cycling cleats indoors. And because your cycling training plan asks for incredibly intense efforts, the Floor Mat can ensure firm contact with the ground and prevent movement during leg-busting intervals. Add a Sweat Guard to your indoor cycling collection and you’ve got a training party! - Non-slip surface keep you safe while in cycling cleats - Protects floors from sweat and bike grime - Water-repellent surface does what it was designed to do – keep sweat off your floor - Compress-ability ensures trainer stays put during intense efforts - Easily rolls up for storage - Cleans easily with soap and water - Absorbs noise and vibration - Enhances overall stability of any indoor trainer setup - 4mm (5/32?) thickness is optimal balance of support and storage

- Large and rollable trainer mat - Made from high quality, water-repellent 6mm thick foam - Protects your floor against scratches and sweat - Muffles noise and vibrations - 180 x 85 cm

Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.

All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes

Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.

This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm

- Replacement freehub body compatible with Neo 2T (T2875.60), Flux S (T2900S.60 A), Flux 2 (T2980.60 A) direct drive trainers - NOT compatible with older generation Neo (T2800), Neo 2 (T2850/T2850.60), Flux (T2900), Flux S (T2900S/T2900S.60) and Flux 2 (T2980/T2980.60)

This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes. How to place the Campagnolo Body: 1. Remove the cap with a 5-millimeter Allen key. 2. Replace the Shimano/SRAM body with the Campagnolo body. 3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.

Stick to your fitness plan year round with the help of the Saris Mag+ trainer. It is the perfect way to keep your legs warm when it's cold, dry when it's wet, and safe when it's too dark to ride outside. With this turbo trainer, it's easy to turn your bike into your go-to calorie burner — no matter the season. Simply attach the handlebar-mounted shifter to change resistance during your workout without having to leave your bike. Want to train with Zwift or Rouvy? All you need is a speed sensor. Visit our setup guide to learn how to get started. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Mag+ comes with convenient, adjustable handlebar-mounted shifter. - Compatible with Zwift and other indoor cycling apps

With the Antares roller you can cycle freely to refine your coordination and technique. This roller can be retracted to 80 cm. Conical Rollers The Tacx rollers are conical which ensure that your bike always remains in the middle of the roller while you are riding. This makes riding on the rollers easier and safer. Retractable The Tacx rollers are retractable to 80cm. FEATURES Type of trainer: Roller Roller diameter: 100-110mm (3.93-4.33in) Suitable bikes: All bikes with a wheel diameter of 26 to 29 in SPECIFICATIONS Max. footprint (lxw): 1350 x 470 mm (53 x 18.5 in) Height: 135 mm (5.31 in) Dimensions when folded: 800 × 470 × 135 mm (31.5 × 18.5 × 5.31 in) Weight: 7.7 kg (17.0 lbs) Trainer Type: Basic , Roller Article number: T1000

With the Tacx tablet stand you can place your tablet at a comfortable height and distance while using your bike trainer. Adjustable to different tablet sizes - length 182-267mm, width 112-197mm, max. thickness 13mm.

A Killer Training Combo What happens when you pair a speed sensor with the #1 selling bike trainer in the USA? You get a combo that’s ready for any virtual—or non-virtual—training ride. It’s the ideal setup for budget-conscious athletes looking to join fun, virtual communities, like Rouvy and Zwift, without a traditional smart trainer. Simply install the magnetless speed sensor on the rear wheel of your bike, mount your bike to the solid Fluid2 trainer with our innovative club knob, connect to your virtual training app of choice via Bluetooth or ANT+, and voilà! - you’re ready to sweat. Product Features - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Included speed sensor connects you with Rouvy, Zwift and other indoor cycling apps. - ANT+ USB and BlueGiga USB sold separately. - Includes one month subscription to Rouvy virtual training app In the box: - Fluid² Smart Equipped Bike Trainer - Dual-band magnetless speed sensor - Fluid² is the best-selling trainer in the USA. - Fluid resistance unit creates optimal road-like feel. - Fluid resistance unit provides a quiet and consistent ride. - Noise level at 20 mph is super quiet 64-68 decibels. - Large, individually precision-balanced flywheel allows for improved road-like feel. - Self-cooling mechanisms including a patented fan design keeps the unit performing better, longer. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Comes on the foldable Classic frame with spring loaded, bolt-action lever. - Precision-machined alloy roller reduces tire wear and slippage. - Features clutch knob for perfect roller-to-tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27" and 29" wheel sizes – up to a 2.0 tire. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm and 135mm. - Trainer tire recommended. - Compatible with indoor cycling apps. - Trainer is tested to the combined weight (rider and bike) of 300 lbs. - Optional thru-axle adapter available for 142x12mm and 148x12mm bikes. - ANT+ USB and BlueGiga USB sold separately. - Formerly branded as CycleOps Fluid² Smart Equipped