Parts & Accessories

Ensure you have the ability to carry all your bikes with their different front axle standards with these Impakt Adaptor Cores. Used with Swagman's Impakt fork mount system, these cores are available in the popular thru-axle sizes found on today's road, mountain, gravel, and fat bikes.

Pair of EndCaps for Yakima CoreBar.

Tensioning handle for FrontLoader universal bike mount. Includes one handle.

Pair of EndCaps for Yakima JetStream bars.

Safety and wheel straps for Joe Pro series strap racks. Includes one each.

Includes a single SKS key.

Chainstraps for a multitude of rear of car bike racks.

Rear wheel strap for Boa bike mount. Includes one strap.

Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

Lock housing for Q Towers. Includes 1 lock housing and 1 retaining clip.

Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.

End caps for 86" Cross Bars. Includes four end caps Please note these end caps are specific to the 86" cross bar.

Thru-axle adapter for the Kuat TRIO rack.

Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.

SKS stands for "Same Key System." These types of cores enable you to lock all your Yakima products with just one key. When replacing a core on your Yakima product, you may need a Control key to remove your existing unlocked core so you can transfer the core to a different Yakima product.

Fat bike skewer and thru axle tube adapters for the Küat Trio roof rack.

Use these adapters to attach the LockNLoad platform directly to the Yakima TimberLine and SkyLine towers. They eliminate the need for a traditional crossbar, and put the platform lower and closer to the roof-giving your rig a clean, customized look. One pair of LockNLoad SL Adapters required for each pair of towers. Check your vehicle fit to verify requirements Product Details: - Sold as a set of 2 adapters with included hardware to attach to 2 Yakima TimberLine or SkyLine towers (towers sold separately). - Structural steel brackets with powder-coat finish for durability and resistance to the elements. - The LockNLoad platform requires 2 or 3 sets of adapters (check your vehicle's and platform's fit requirements for number of adapters needed). - Only compatible with Yakima SkyLine and TimberLine towers. - Each set of adapters adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of adapters and towers. Never exceed the Yakima-specified weight limit for your vehicle. Product Specs: - Weight: 0.50 lbs - Some assembly required, 60 minute install

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

These durable, easy to install felt pads are custom shaped for SweetRoll and HullHound and provide additional protection for your boat. Sold as pairs.

Yakima's Hood Anchor creates a secure attachment point at your hatch, trunk or hood for bow and stern tie downs. Sold in pairs, they’re highway-speed strong, coated to protect your vehicle’s paint job, and super easy to use - just drop them in place. Product Details - Creates a secure attachment point for bow and stern tie downs - Fits easily under a hood, hatch or trunk - Installation is simple - just drop them in place - Durable coated strap protects your vehicle's paint - Sold as a pair Technical Specs - Weight: 0.43 lbs - Dimensions: L 6.50in x W 2.00in x H 10.12in

The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage - Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in

Yakima's SKS Accessory Lock Housing is a great way to make sure your bike and luggage mounts stay put. It works with Yakima's SKS lock cores (Same Key System; sold separately) so that you only need to keep track of one key for all your rack-security needs. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately

Thru-axle adapter works with WheelHouse to hold wheels with 12mm/15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front Hubs TECHNICAL SPECS - Weight: 0.44 lbs - Dimensions: L 9.00” x W 0.75” x H 2.00”

Lock housing for Q Towers. Includes 4 lock housings. SKS lock cores not included (sold separately).

The SkyHook gear hangers easily mount to your SkyRise rooftop tent to keep you organized at your campground. The simple to use carabiners slide into the SideTrack on the outside edge of the SkyRise floor to keep gear at an arm's length and off the ground. Sold in packs of four, each carabiner is supported with a nylon strap rated to handle up to 50 pounds. Jackets and wet towels, day packs and dry bags - whatever it is, the SkyHooks have got you covered. Product Details: - Hanging storage hooks for the SkyRise tent keep your camping gear organized - Slides into the SideTrack on the outside edge of the SkyRise base and hangs down below the tent floor to easily hold camping necessities - Yakima carbine attachment hook is secure, strong, and easy to use - Strong, durable nylon strap attached to each carabiner can support 50 pounds of gear - Sold as a pack of four Product Specs: - Weight: 0.48 lbs - Dimensions: L 6.00" x W 1.60" x H 0.50"

Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1. This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market. PRODUCT DETAILS - Includes T-slot hardware, covers, and install tool. - Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts. - Compatible with Yakima JetStream bars and most other T-slot style crossbars. TECHNICAL SPECS - Weight: 0.25 lbs

Fat bike skewer and thru axle tube adapters for the Kuat Trio roof rack.

Add the SmarT-Slot Kit 5 to the TopWater box for an even sleeker profile on T-Slot Crossbars. This easy hardware kit replaces the standard mounting hardware, and directly attaches into a T-slot channel on your crossbars. It works with all Yakima T-slot crossbars as well as most other T-slot crossbars. Product Details: - T-slot hardware kit for the TopWater rooftop fishing rod box. - Includes T-slot hardware, covers, and an install tool. - Compatible with all Yakima T-slot crossbars and most other T-slot crossbars. Product Specs: - Weight: 0.12 lbs - Dimensions: L 0.75in x W 0.75in x H 1.60in

Yakima's ArmLock cable lock is compatible with their DoubleDown Ace rack (sold separately). It integrates into the rack, stowing in the rack's arm when the lock is not in use. And, you simply pull it out and wrap it around the outside bike and lock it to safeguard your bikes on the rack.

Why let loading and unloading take a toll on your gear and rack systems? Our new, extra-thick Wear Strip is a raised rubber strip designed to protect equipment and T-slot crossbars. Sold in trim-to-fit pairs, the Wear Strips install easily and help keep out debris. Product Details: - Durable rubber strip protects gear and crossbars from the wear-and-tear of loading - 76" length can be easily trimmed to fit any bar width - Compatible with Yakima HD Bar and JetStream Crossbars - Set of two Product Specs: - Weight: 0.50 lbs - Dimensions: L 76.00in x W 1.12in x H 0.33in - Fully assembled