Other

- Add to older versions of the SuperStand to extend height to accept 29er wheels

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.

- Center mount - Made of alloy - Alloy top plate - Adjustable with lockscrew - 24'' to 700C

- For mounting a bottle cage to 22.2mm handlebars - Bottle cage not included

An adjustable, rear integrated kickstand that supports kids bikes, from 20" to 26" wheels. A leg to stand on for most kid's bikes Intended for kid's bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep your little riders' bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 20" wheels all the way to 26" wheels. Product details - Adjustable length fits bikes with 20-26" wheels - Compatible with Trek bikes equipped with integrated direct mount chainstays - Doesn't interfere with pedaling - Includes both M5 and M6 mounting hardware

An adjustable rear-mount kick stand that fits bikes of all sizes, from 24 inch to 29 inch wheels. Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. Product details - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware

A neoprene pogie designed to work with flat or riser style handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Vent zipper can be opened if hands start to overheat - Measures 10" wide by shifters/brakes

A neoprene pogie designed to work with drop handlebars fitted with integrated shift/brake levers with externally routed shift cables and housing. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Opening measures 8.5" across

Bike tow rope This bike tow rope has been designed to make family cycling, especially mountain biking, more fun and enjoyable for everyone. The Bike Taxi is only to be used on paths, where it is easy to take your child up climbs and thus eliminate physical differences. The Bike Taxi is simply installed on the saddle rails of the person towing and is very quick to attach to the stem of the towed bike. Once at the top, the child can easily unhook it. The rope is made of high density polyethylene fibre, which is highly resistant to abrasion, and is self-retracting, without risk. The Bike Taxi is suitable for all types of bicycles and the person towing can use an E-bike Universal - For all types of saddle rails Easy to install - No tools required Easy to handle - Fast attachment and detachment Safe - High-performance reel with complete return of the wire Lightweight and compact - Discreet, under the saddle, for only 140 g

- High resistance clear polyurethane stickers - Protects frame, chainstays, cranks, etc. from impact and scratches - Non-yellowing, tear resistant and non-cracking - Strong and durable adhesive, UV and temperature resistant, waterproof - Visit Zefal's website for more details

- High resistance clear polyurethane stickers - Protects frame, chainstays, cranks, etc. from impact and scratches - Non-yellowing, tear resistant and non-cracking - Strong and durable adhesive, UV and temperature resistant, waterproof - Visit Zéfal's website for more details

Reusable zip ties - 200mm long x 7.4mm wide - 100 pieces

Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit

Keep your investment protected with durable armor designed specifically for your ride. - Protection engineered to keep your ride looking as good as new for years to come. - Trek protective armor - Model-specific custom fit

Zipp Vuka / Stealth Riser Kits - Bolt kits sold separately

For riders looking for comprehensive coverage to protect high risk areas of a Hardtail MTB frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10 year warranty. - Matte clear film - Fits all makes, models and sizes - Designed for maximum coverage with minimal trimming - Designed around hardtail mountain bike geometry - The Hardtail MTB Kit includes protection for toptube, full downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

- Additional holder to use the same baby seat on different bicycles - Compatible with Guppy Mini, Bubbly Mini+ and Bilby Junior - Not compatible with rear seat - Baby Seat Mount Type: Stem/Steerer mount - For round tubes only - Position: Front

Park's Adjustable Shop Stool is ideal for quickly maneuvering into the best position when working on your bikes. It's adjustable from 17 to 22 inches high and features 5 smooth-rolling wheels for easy scooting. You'll also love the comfy padded seat with Park's colorful logo.

Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

Park's Pizza Tool is the perfect gift for the cyclist who has it all. It's a quality pizza cutter reminiscent of classic highwheelers that has a blade sharp enough to slice through the roughest terrain. This great tool also includes a display stand and gift box. Never use a run-of-the-mill pizza cutter again.

Park's Shop Stool boasts a super-comfy padded seat, sturdy chrome-plated-steel legs and Park's colorful logo on top. The seat spins 360 degrees and is positioned at a height of 32 inches, which is perfect for wheel truing and all other work at a bench or counter.

The STL-3K is kit that will add a back rest to the STL-1.2 work stool (sold separately). The STL-3K includes a back rest, two steel support bars, and fasteners. NOTE: The STL-3K will only work on the STL-1.2 work stool. The previous STL-1 work stools will not accept the STL-3K

Keep your bleed kits organized and your workbench clean. The JH-4 mounts to any flat surface and securely stores and organizes your Park Tool Hydraulic Brake Bleed Kit, with purpose-designed holders for the fittings, hoses, syringes, and other accessories, plus a separate drip tray that allows hoses to drain worry-free. The JH-4 is constructed from durable powder coated steel and includes stickers for clear labeling of mineral oil or DOT fluid bleed kits. - Assembled dimensions (main assembly): 16" x 1.66" x 2.38" (406 x 42 x 60 mm) - Assembled dimensions (drip tray): 9.75" x 1.85" x 3" (248 x 47 x 76 mm) - Mounting holes spaced for 1” or 38 mm center-to-center pegboard holes - See instructions for mounting holes and recommended spacing - Mounting hardware not included

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against chain slap, scratches, scuffs, stone chips, cable rub and other damage to your chainstays - Durable, weatherproof 3M adhesive - 20-piece pack is designed to fit chain stays and rear stays on most bikes

The solution for protecting your disc brakes during maintenance or transit. The patent pending eye catching design makes life simple, fast and easy to use, Muc-Off's disc brake covers help to ensure you won't have protectant or lube overspray on your discs. - Sold in pairs - Protects rotors from lubricant and brake oil - Fits all MTB and road rotors - Made from breathable neoprene - Rinse and hang dry after use

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips, cable rub and other damage to your forks - Durable, weatherproof 3M adhesive - 8-piece pack is designed to fit most front suspension forks

- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and other damage to your frame, toptube, downtube, chainstays and cable rub areas - Extra wide downtube pieces to cover wider E-Bikes - Durable, weatherproof 3M adhesive - 45-piece pack will fit most E-MTB’s with wider down tubes

Introducing the Piston® Pro X LICENSE PLATE MOUNT. Simply remove the endcap, and attach the mount to achieve unparalleled visibility on the road. Upgrade your ride and hit the road with confidence and style. - For use with Piston® Pro X - Billet machined aluminum - Rotates for use in stowed or in-use position - Black Anodized