Bike Essentials

Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.

Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.

- ADAPTIVE: Carbon Digital Light SynthesisTM 3D printing technology, offering seamlessly engineered zonal cushioning - VERSUS EVO: full channel design for pressure relief on soft tissue area - A combination of a high module full carbon shell and a carbon rail for ultimate stiffness and lightness - MOEBIUS RAIL: (7 x 10mm) patented closed-loop design for a balanced weight distribution - Easy to clean - Saddle Weight: 147g

Performance GPS Cycling Computer with Mapping and Touchscreen - Dynamic performance monitoring provides insights on your VO2 max, recovery, training load focus, heat and altitude acclimation, nutrition, hydration and more - MTB dynamics track jump count, jump distance and hang time as well as Grit, a measure of the ride’s difficulty, and Flow, which tracks the smoothness of your descent so you have a score to beat next time - Cycling safety features include new bike alarm, group messaging and tracking, assistance and compatibility with Varia rearview radar and lights so you can see and be seen - includes routable Garmin Cycle Map with popularity routing — which helps you ride like a local — plus on-device route creation, off-course recalculation and back to start; integrated Trailforks data includes trail difficulty ratings - Customize with free apps widgets and data fields from the Connect iQ Store - Battery life: up to 20 hours with GPS; extendable up to 40 hours with the Garmin Charge power pack or in battery save mode - Speed sensor, Cadence sensor and Heart rate monitor Who cares that the Edge 830 touchscreen cycling computer puts trail maps and ratings at your fingertips and offers insights to help you improve? You do. So, whether you’re an enduro extremist, a black diamond expert or somewhere in between, Edge 830 is ready to tame the trails with you. In The Box - Edge 830 - Flush out-front mount - Standard mount - Speed sensor - Cadence sensor - Heart rate monitor - Tether - USB cable - Documentation

Increase the performance of Rockshox forks with a Charger upgrade kit. Features include a no compromise lockout, where the "Pedal" and "Lock" circuits sit behind the damping, meaning no sacrifice in downhill bump control while maintaining pedaling stability on climbs. The extruded bladder design is durable, resists damping change during extended downhills and has virtually zero pressure offset for small bump sensitivity. Available damper settings: Open with an adjustable low speed compression, Pedal and Lock. - Extruded bladder design is durable, resists damping change during extended downhill runs and has virtually zero pressure offset for small bump sensitivity - Charger version reduces vibration and is almost 100 grams lighter than the previous damper

- Compact, lightweight satellite communicator enables two-way messaging and interactive SOS globally (Active satellite subscription required. Some jurisdictions regulate or prohibit the use of satellite communication devices.) - Navigate back to where you started by using TracBack routing - Share your location with loved ones back home at any time (active satellite subscription required) by using your MapShare page or with your coordinates embedded in your messages - Get accurate heading information using the digital compass—even when you're not moving - Sync with the Garmin Explore app and website on your compatible smartphone for trip planning and topographical mapping, and create waypoints, courses, activities and collections you can sync to your device

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

Introduce the rider you are today to the one you’ll be tomorrow. The Edge® 840 touchscreen cycling computer offers targeted adaptive coaching when used with your compatible power meter and heart rate monitor. It helps you manage your efforts by providing power targets throughout a course plus stamina insights, so you know how much gas is left in the tank. Get superior accuracy under dense tree cover or the urban canyon, thanks to multi-band GNSS technology. It features button controls that work in any environment matched with a responsive touchscreen so you can tap, pan and swipe on the fly. Whether you’re riding roads, trails, gravel or indoor, you can benefit from insights and workouts that will help you understand your strengths and weaknesses and prepare for upcoming races or personal milestones.

The Charger 2.1 damper upgrade kit allows the fork to ride higher in the travel on compression while keeping the tires planted to the ground for unmatched control. - Includes complete right side internals

To achieve maximum suspension performance, proper setup and tuning is essential. Go to www.rockshox.com/app for suggested air spring pressure and rebound damper settings for your fork. Go to www.sram.com/service for additional product and technical information. Air spring pressure and coil spring tables are available in the RockShox® Front Suspension Oil, Air, Coil, Token, and Specification documents. For a complete list of available coil springs and Bottomless Tokens™, consult the RockShox Spare Parts Catalog. Consult the RockShox service manual for your fork for complete disassembly and assembly procedures. Tuning suggestions are starting points. It may take trying various adjustments to find the settings that work best for each individual rider and trail condition. - Includes complete right-side internals

To achieve maximum suspension performance, proper setup and tuning is essential. Go to www.rockshox.com/app for suggested air spring pressure and rebound damper settings for your fork. Go to www.sram.com/service for additional product and technical information. Air spring pressure and coil spring tables are available in the RockShox® Front Suspension Oil, Air, Coil, Token, and Specification documents. For a complete list of available coil springs and Bottomless Tokens™, consult the RockShox Spare Parts Catalog. Consult the RockShox service manual for your fork for complete disassembly and assembly procedures. Tuning suggestions are starting points. It may take trying various adjustments to find the settings that work best for each individual rider and trail condition. - Includes complete right-side internals

Increase the performance of Rockshox forks with a Charger upgrade kit. Features include a no compromise lockout, where the "Pedal" and "Lock" circuits sit behind the damping, meaning no sacrifice in downhill bump control while maintaining pedaling stability on climbs. The extruded bladder design is durable, resists damping change during extended downhills and has virtually zero pressure offset for small bump sensitivity. Available damper settings: Open with an adjustable low speed compression, Pedal and Lock. - Extruded bladder design is durable, resists damping change during extended downhill runs and has virtually zero pressure offset for small bump sensitivity - Charger version reduces vibration and is almost 100 grams lighter than the previous damper

Park Tool's Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest quality high-speed steel for precision cutting and long life. The unique thread guide system used with the FTS-1 is specially designed to allow the metal chips and shavings that result during use to fall completely through the guide, preventing damage to the fork threads and the tool. The FTS-1 includes: • Die handles • 1" x 24 tpi cutting die (Part #606) • 1" cutting guide (Part #610) Accessory dies and guides are also available separately: • 1-1/8" x 26 die (Part #607) • 1-1/8" guide (Part #611) • 1-1/4" x 26 die (Part #608) • 1-1/4" guide (Part #612) Die handles fit all three sizes of dies and guides.

High-quality combination ratchet wrench set by Wera. The new generation of combination ratchet wrenches, suitable for hexagon bolt heads or nuts. Comes with a holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. - Practical holding function thanks to the metal plate in the jaw - Limit stop prevents any slipping - The double-hex geometry reduces the risk of slipping - Return angle of only 30 degrees - "Take-it-easy" tool finder: color coding by size

We put together this set of carefully chosen tools to do basic maintenance and cleaning as well as perform a wide variety of repairs and adjustments on just about any bicycle. A perfect way to start or add to your collection of shop-quality bicycle tools. The AK-5 includes a tough toolbox to protect your investment. Kit Includes: - AWS-1 3-Way Hex Wrench - BBB-4 Big Blue Book of Bicycle Repair - CC-4 Chain Checker - CM-5.3 Cyclone Chain Scrubber - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CT-3.3 Chain Tool - DCW-1 Double-Ended Cone Wrench: 13/14mm - DCW-2 Double-Ended Cone Wrench: 15/16mm - DCW-3 Double-Ended Cone Wrench: 17/18mm - DH-1 Dummy Hub - DT-2 Rotor Truing Fork - FR-5.2 Cassette Lockring Tool - GSC-1 GearClean Brush - HCW-16.3 Chain Whip/Pedal Wrench - HXS-1.2 Professional L-Shaped Hex Wrench Set - MLP-1.2 Master Link Pliers - PAW-12 12" Adjustable Wrench - RR-12 Tape Measure - SD-2 #2 Phillips Screwdriver - SD-3 3mm Flat Blade Screwdriver - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - TL-1.2 Tire Lever Set - TWS-3 Torx Compatible 3-Way Wrench - VC-1 Valve Core Tool

A HIGH-SECURITY LOCK IN A CLASS OF ITS OWN Capable of withstanding even the most determined of attacks: the BORDO GRANIT XPlus™ 6500 Folding Lock is worthy of many superlatives. The BORDO GRANIT XPlus™ 6500 Folding Lock is quite literally a tough nut for bike thieves to crack since it incorporates "granite", or at least the ABUS take on it; 5.5mm bars manufactured from specially hardened steel and connected with special rivets, which offer protection against even the most determined of attacks. The ABUS Link Protection Shield ensures that these rivets are not only flexible, but also extremely resistant to attacks involving sawing. The picking-resistant XPlus precision disc cylinder from ABUS also has a lot to offer, including outstanding protection against attempts at tampering. This combination has earned the BORDO GRANIT XPlus™ 6500 Folding Lock a phenomenal top score of 15 in the ABUS Security Level System. - 7/32" bars with extra-soft two-component casing to prevent damage to paintwork - Color-coordinated Soft-Touch silicone cover for the lock body - ABUS Link Protection Shield for a high level of protection against hinge sawing - The bars, the body and the load-bearing parts of the locking mechanism are manufactured from specially hardened steel - ABUS XPlus cylinder for extremely high protection against manipulation, e.g. picking

Performance GPS Cycling Computer with Mapping - Dynamic performance monitoring provides insights on your VO2 max, recovery, training load focus, heat and altitude acclimation, nutrition, hydration and more - Cycling safety features include new bike alarm, group messaging and tracking, incident detection and compatibility with Varia rearview radar and lights so you can see and be seen - Includes routable Garmin Cycle Map with popularity routing — which helps you ride like a local — plus off-course recalculation and back to start; mountain biking model has integrated Trailforks data, including trail difficulty ratings - Customize with free apps, widgets and data fields from the Connect iQ Store - MTB dynamics track jump count, jump distance and hang time as well as Grit, a measure of the ride’s difficulty, and Flow, which tracks the smoothness of your descent so you have a score to beat next time - Battery life: up to 20 hours with GPS; extendable up to 40 hours with the optional Garmin Charge power pack or in battery save mode Who cares that the Edge 530 cycling computer offers dynamic performance monitoring and insights to help you improve? You do. So, whether you’re a podium finisher, Kona qualifier, gravel grinder, straight-shaven, urban pedaler, dirt ball or somewhere in between, Edge 530 is ready to roll as your new riding partner. In The Box Device Only - Edge 530 - Standard mount - Flush out-front mount - Tether - USB cable - Documentation Sensor Bundle - Edge 530 - Standard mount - Flush out-front mount - Speed sensor - Cadence sensor - Heart rate monitor - Tether - USB cable - Documentation

Pedro's Tool Station includes 13 professional-quality Pedro's tools covering a wide array of common repairs and adjustments. Designed for public use, all tools are permanently tethered to the steel back panel with extra-long stainless steel cables. The tools are stored in our Burrito Tool Wrap with a protective weather-resistant flap. Three spare cables and crimp sets are included and can be used to add extra tools, a floor pump, or to facilitate replacement of tools if necessary. The Tool Station also features 4 mounting holes which are keyhole shaped to allow easy removal and re-installation if desired. Additionally, the central mounting holes are spaced to fit standard steel sign posts if a free-standing setup is preferred. - 6-Pack Chain Tool - Chain Tool and three-way spoke wrench (includes 2 Spare Pin/Screws) - Folding Hex Wrench Set - 1.5-6mm sizes - Pro T/L Hex Wrench - 8mm - Y Wrench-T10,T25,T30 sizes - Tire Levers - Yellow Pair - Pro Pedal Wrench - #2 Phillips Screwdriver - 5.5mm Flat Blade Screwdriver - Toothbrush - Drivetrain brush Chain Checker Plus - Chain wear check tool, chain hook tool, and chainring nut wrench - Adjustable Wrench-10" - Trixie - 8, 9, 10, 15mm Box, Bottle, Cog Lockring

The Satori Smart is the only manually controlled trainer which measures speed, power and cadence. The resistance of this wheel-on trainer is changed manually with 10 handlebar positions. And it connects to most popular training apps, like Zwift, Tacx and TrainerRoad. Speed, Power & Cadence This unique manual Smart trainer is one of a kind. The patented measuring technology in the Satori Smart enables this bike trainer to accurately measure speed, power, and cadence. Manually Adjusted Resistance The resistance of the Satori Smart can be easily changed manually with 10 handlebar positions. Ranging from 100 Watts to 950 Watts, this trainer is the perfect training companion for workouts with high power intervals. Train Anywhere Powered by two AA batteries the Satori Smart is a trainer you can setup anywhere you like. No need for an external power source. The batteries will last for approximately a year. Securely Locked In Tacx wheel-on trainers are easy to set up. With two easy clicks your bike is securely locked in the trainer frame, making sure that your bike is safely fixed and doesn't go anywhere. Dual Material Roll The roll is made from two materials: a hardened steel sleeve with a soft core elastogel. The steel sleeve prevents wear of the trainer, while the elsastogel absorbs vibrations to reduce noise. Skyliner As A Handle The Skyliner not only serves as a front wheel support for a natural cycling position, but can also be used as a handle for your trainer. Stable Frame Designed with a large footprint and strong materials, this bike trainer is able to withstand the most intense training sessions. FEATURES Type of trainer: Basic Smart trainer with magnetic brake Magnets: 1 Neodymium magnet Transmission: Roller, 30 mm Electrical requirements: 2x AA battery Power indicator: None Connection indicator (ANT/BT): None Firmware upgradable: Yes Suitable bikes: Race, Tri & MTB , if necessary with axle skewer Suitable axles: Width of rear fork: Race 130 mm, MTB 135 mm. Adapters for other widths available Supplied with: Front wheel support , Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS Max. power (40 km/h): 950 Watt Max. incline: n.a. Simulation of descent: No Max. torque: 16.3 Nm Max. brake force: 48 N Flywheel: Actual of 1,6 kg Mass inertia: 16.9 kg (37.3 lbs) Calibration: Spin down Footprint (lxw): 675 × 650 mm (26.6 × 25.6 in) Height: 410 mm (16.1 in) Dimensions when folded: 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in) Weight: 7.75 kg (17.1 lbs) Article number: T2400 DATA OUTPUT AND CONTROL Wireless communication: ANT+ & Bluetooth Control by: Handlebar resistance lever with 10 positions Output: Cadence , Power , Speed Read out on: Bike computer , Computer with ANT+ antenna , Smartphone , Sports watch , Tablet Accuracy: <10%

The 791 Reamer Set reamer is used on the PF30 frame shells. The reamer is sized at 45.94mm. The 791 Reamer Set must used with the HTR-1 Head Tube Reamer and Facer, a 750.2 Centering Cone and the 690-XL Facer. The 791 set also includes a pilot that allows a facing-only option of the PF30 frame shell.

The Rampage Comp Baysik Helmet offers a class-leading feature set including Mips, a lightweight fiberglass shell, a fully-adjustable goggle-compatible visor, and many other options usually reserved for much more expensive mountain bike helmets. The design, inspired by our championship-winning Rampage Pro Carbon, maintains that aggressive design that looks as fast sitting still as it does on the bike.

Pro-inspired full-face mountain bike helmet featuring MIPS. - MIPS' added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Lightweight fiberglass shell construction designed for strength and performance - Goggle compatible adjustable visor - Removable, washable moisture wicking liner - Lightweight and reliable Double D-Ring closure - Fiberglass, EPS, EVA, PC, PCV, Polyester

Rampage Comp Stohn from Fox Racing.

Lightweight, next-level full-face helmet. The Proframe RS Helmet takes the lightweight breathability of the Proframe and takes it to the next level of safety and performance. It features the all-new Mips® Integra Split protection system, which combines a dual-density foam - for high and low-speed impacts - and a low friction layer between the two layers designed to reduce rotational forces in a crash that would otherwise be transmitted to the brain. Key Features and Specifications: - BOA® fit system for class-leading fit and security - Equipped with Mips® Integra Split low friction layer - Dual-density foam for high and low-speed impacts - 3-position adjustable visor compatible with goggles - Removable under-visor GoPro mount included - Increased ventilation and decreased surface contact area for improved cooling - Ionic+ anti-microbial liner to reduce odor - Multi-sized cheek pads to optimize fit - Fidlock® magnetic closure system on chin strap Weight: 820 g (size medium) Certifications: ASTM F1952 - DH Certified ASTM F2032 EN 1078:2012 + A1:2012 AS/NZ 2063-2020 CPSC 1203 How to Dial Your Fit: - BOA® dial: 52 micro adjustments - counterclockwise to loosen, clockwise to tighten - allows for a precisely dialed fit. Adjust while wearing the helmet. - Back cradle: four adjustment points move the cradle up or down your head to ensure the best fit possible. - Cheek pads: two sets of cheek pads are included with the helmet - a preinstalled thin pad set and an optional thick pad set for a more snug fit. Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel Materials: EPS, PC, PA, EPP, polyester

Lightweight, next-level full-face helmet. The Proframe RS Mash Helmet takes the lightweight breathability of the Proframe and takes it to the next level of safety and performance. It features the all-new Mips® Integra Split protection system, which combines a dual-density foam - for high and low-speed impacts - and a low friction layer between the two layers designed to reduce rotational forces in a crash that would otherwise be transmitted to the brain. Designed to meet the needs of all-mountain riders and enduro racers, the increased ventilation and decreased surface contact of the helmet keep you cool on long rides, while the Ionic+ anti-microbial liner and multi-sized cheek pads provide optimized comfort and fit. The updated BOA® fit system offers micro-adjustability providing class-leading fit and security. The chinstrap utilizes a Fidlock® magnetic closure system for easy opening and closing, even with gloves. The 3-position adjustable visor with lock-down screw is compatible with goggles. Those looking to capture every sweet run will appreciate the removable, under-visor GoPro mount on the Fox Proframe RS mountain bike helmet. Key Features and Specifications: - BOA® fit system for class-leading fit and security - Equipped with Mips® Integra Split low friction layer - Dual-density foam for high and low-speed impacts - 3-position adjustable visor compatible with goggles - Removable under-visor GoPro mount included - Increased ventilation and decreased surface contact area to improve cooling - Ionic+ anti-microbial liner to reduce odor - Multi-sized cheek pads to optimize fit - Fidlock® magnetic closure system on chin strap Weight: 820 g (size medium) Certifications: ASTM F1952 - DH Certified ASTM F2032 EN 1078:2012 + A1:2012 AS/NZ 2063-2020 CPSC 1203 How to Dial Your Fit: - BOA® dial: 52 micro adjustments - counterclockwise to loosen, clockwise to tighten - allows for a precisely dialed fit. Adjust while wearing the helmet. - Back cradle: four adjustment points move the cradle up or down your head to ensure the best fit possible. - Cheek pads: two sets of cheek pads are included with the helmet - a preinstalled thin pad set and an optional thick pad set for a more snug fit. Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel Materials: EPS, PC, PA, EPP, polyester

The Rampage Comp Matte Black Helmet offers a class-leading feature set including MIPS, a lightweight fiberglass shell, fully-adjustable visor, and many other options usually reserved for much more expensive mountain bike helmets. The design is inspired by our championship-winning Rampage Pro Carbon and maintains that aggressive design which looks as fast sitting still as it does on the bike. Features - Proven MIPS impact protection system reduces rotational forces in a crash - Lightweight fiberglass shell designed for strength and performance - Goggle compatible adjustable visor - Removable, washable moisture-wicking liner - Lightweight and reliable double d-ring closure

Park Tool's Crown Race Cutter Adaptor is used in conjunction with the CRC-1 Crown Race Cutting Tool (sold separately) to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes. It includes a precision-machined adaptor body and a 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5-inch taper of 4.25 inches.

45NRTH Wölvhammer BOA® winter bike boots make year-round riding possible, with high-tech design and materials that stand up to snow and ice. Get yours here. Most winter boots aren't made for riding bikes — they're too warm in some spots or not warm enough in others, and they're not optimized for pedaling. Wölvhammer BOA® boots are the answer for winter riders. Designed and built for the rigors of real winter riding (deep snow, slippery ice, cold pedals), These winter bike boots are rated for comfort from 0º to 25ºF (-18º to -4ºC), slotting between our Ragnarök and Wølfgar boots. Take on winter rides with Wölvhammer. - Rated for 0º to 25º F / -18º to -4º C comfort - The BOA® Fit System delivers micro-adjustable, precision fit engineered to perform in the toughest conditions - Hook-and-loop upper strap helps secure boot - Removable synthetic liner boot for quick drying - Waterproof breathable membrane to manage moisture - 200 g of Primaloft® insulation - Aerogel insulation underfoot blocks the chill from snow, ice, and cold pedals, and allows for insoles without sacrificing warmth - Non-slip sole for walking on icy surfaces - Compatible with flat and clipless pedals

- Lightweight carbon shell - 23 large freeflow vents with internal channels for maximum cooling - Energy absorbsion and slip plane technology - Crash release visor system (CRV) - Easy position visor, no bolts needed - Removable liner for easy washing - Injection moulded branded trim to protect carbon helmet shell - Agion Bluesign approved antimicrobial treatment - Fidlock magnetic closure - Certified: CPSC Bicycle & ASTM F1952-15 (Downhill) Sizing: - Small = 55 – 56cm - Medium = 57 – 58cm - Large: 59 – 60cm - X-Large: 61 – 62cm - XX-Large: 63 – 64cm

Bundle includes qty 1 of the following: - Pressure Washer with all lances - Storage bag - Snow Foam Lance - Nano-Tech Bike Cleaner, 1L (900933-02) - Nano-Tech Cleaner Concentrate, 1L (901007-02) - Bike Protect, 500ml (901684-01) - Drivetrain Cleaner, 500ml (901101-01) - C3 Dry Lube, 120ml (900965-02) - Qty 2 Premium Microfiber Polishing Cloth (901555-01)